Juniper vEvolved¶
Base Image¶
Base images can be downloaded from the download page.
Import Image¶
sherpa server image import \
--src vJunosEvolved-25.2R1.8-EVO.qcow2 \
--version 25.2R1.8 \
--model juniper_vevolved \
--default
Default Node Parameters¶
| Property | Value |
|---|---|
| Kind | Virtual Machine |
| Tested Version | 25.2R1.8 |
| CPU | 4 |
| RAM | 8GB |
| CDROM Driver | SATA |
| DISK | virtioa.qcow2 |
| DISK Driver | virtio |
| ZTP Method | TFTP |
| Management Interface | re0:mgmt-0 |
| Data Interfaces | et-0/0/0-11 |
| Interface Driver | virtio |
Example Manifest¶
name = "juniper-vevolved"
nodes = [
{ name = "dev01", model = "juniper_vevolved" },
]
ZTP¶
TFTP¶
The Juniper documentation states that a secondary attached disk is the method to provide an initial
config on first boot. However, I could not get this to work with the latest version: 25.2R1.8.
Therefore, the TFTP method is selected for this device type as default.
Notes¶
- Approximate time for the system to be ready:
9 minutes