Juniper vSRX v3¶
Base Image¶
Base images can be downloaded from the download page.
Note
An account is required to download the image.
Import Image¶
sherpa server image import \
--src /some/path/<image_name>.qcow2 \
--version 23.2R2.21 \
--model juniper_srxv3 \
--default
Default Node Parameters¶
| Property | Value |
|---|---|
| Kind | Virtual Machine |
| Tested Version | 23.2R2.21 |
| CPU | 2 |
| RAM | 4GB |
| CDROM Driver | IDE |
| DISK | virtioa.qcow2 |
| DISK Driver | virtio |
| ZTP | cdrom |
| Management Interface | fxp0 |
| Data Interfaces | ge-0/0/0-7 |
| Interface Driver | virtio |
Note
vSRX reads its startup config from a CD-ROM, the only ZTP method it takes: a node or image set
to tftp is refused.
Example Manifest¶
name = "juniper-srx"
[[nodes]]
name = "dev01"
model = "juniper_srxv3"
ZTP¶
ZTP config must be provided in a file named juniper.conf in the root directory of an ISO image.
Node Access¶
sherpa ssh <node-name>
sherpa console <node-name>
Host Requirements¶
PML¶
Page Modification Logging (PML) must be off on Intel Xeon E5 and E7 v4 hosts. PML tracks dirty
memory pages in hardware, and it interferes with the vSRX's nested KVM: the FreeBSD boot loader
hangs early in boot, usually at netstack/init.4th.
Check whether PML is on (Y) or off (N):
cat /sys/module/kvm_intel/parameters/pml
Turn it off with every VM on the host stopped:
echo "options kvm_intel pml=0" | sudo tee /etc/modprobe.d/kvm-vsrx.conf
sudo modprobe -r kvm_intel && sudo modprobe kvm_intel
cat /sys/module/kvm_intel/parameters/pml
The last command shows N. If modprobe -r fails because a VM is still running, reboot the
host instead; the setting in /etc/modprobe.d applies at boot.
With PML off, the host tracks dirty pages in software. Live migration is slower; other VM workloads see little difference.
Notes¶
- Approximate time for the system to be ready:
4 minutes